How to Edit Audio in Final Cut Pro: Learn All the Essential Steps - Motion Array (2023)

Final Cut Pro audio editing isn’t difficult–all the tools you need are already built into the program. Right out of the box, you can adjust levels, add effects, remove noise, enhance voiceovers, and much more! There’s also a whole world of 3rd party plugins you can download and easily use from right inside Final Cut.

Below, we’ll cover all the basic audio controls and where they’re located in Final Cut Pro. Then we’ll walk you through the most common audio editing tasks so that you can learn the workflow.


(Video) How To Edit Audio In Final Cut Pro X

Part 1: Basics Audio Editing Controls in Final Cut Pro

Before diving into all the most common audio editing tasks, you might want to first familiarize yourself with the layout of Final Cut, as well as the fundamental roles that audio plays in a video composition. Once you learn these, the walkthroughs in part 2 will be a breeze.

Audio Controls

If you’re just getting started editing in Final Cut Pro, you may be wondering where to find the audio controls. Truth is they’re not all in one place, so it’s worth taking some time to learn about the different locations you can modify the sound in your project.

How to Edit Audio in Final Cut Pro: Learn All the Essential Steps - Motion Array (1)

The Timeline is the large area toward the bottom of the screen, which is where all your clips are arranged in your project. Below each clip, you should see an audio waveform for the clip’s sound. Above that audio waveform is a line you can drag up and down to adjust the volume. At either edge of every clip, you can find Fade Handles which allow you to audio fade at the beginning or end of any clip.

How to Edit Audio in Final Cut Pro: Learn All the Essential Steps - Motion Array (2)

Above the Timeline and just below the Viewer, you can see a small Audio Meter, which is used to keep track of your audio levels throughout the project. If you click on this small Audio Meter, a larger one will open to the right of your Timeline–much easier to see. Always try to keep your levels below 0 dB or your audio will be distorted when you export. The Audio Meter is color-coded, so if you ever see it become red, you know that the levels need to be brought down.

(Video) How To Make Awesome Intro Sequences in Final Cut Pro X

How to Edit Audio in Final Cut Pro: Learn All the Essential Steps - Motion Array (3)

If you select a clip in the Timeline, you can then open the Audio Inspector by clicking the speaker icon towards the top right above the Inspector panel. Here, you can adjust the clip’s volume, equalization, and modify any Audio Effects you’ve added to the clip.

How to Edit Audio in Final Cut Pro: Learn All the Essential Steps - Motion Array (4)

By opening the Effects Panel and scrolling down to the audio section, you can find dozens of built-in audio effects that can be dragged onto clips in the Timeline. These audio effects cover a wide variety of different sounds you may wish to achieve. Everything from simulating the reverb of a large hall, to making someone’s voice sound like a robot!

Audio Roles

Generally, there are 3 types of sound you will use in your productions: voice, music, and sound effects. Understanding how to combine these together to create an engrossing aural experience for your audience is the mark of a pro video editor.

  • Dialogue or Voiceover is the main focal point of your video’s soundscape, so it should be markedly louder than any competing sounds. The Voice Over Enhancement effect is a great way to make your voiceover pop.
  • Music is a great way to liven up any video, especially compositions without important voiceover or dialogue. If you’d like to add background music under dialogue, make sure to turn down the volume: like 20% as loud as your voice track.
  • Sound effects double the impact of actions in your video by hitting viewers with 2 senses instead of just 1. You can find a huge selection of searchable sound effects in the Photos and Audio Sidebar in the Sound Effects category.

Part 2: Basic Audio Editing Workflow

Now that you’ve familiarized yourself with all the basic audio controls and the roles that sound should play in your videos, it’s time to put those tools to work! Below are short tutorials for the most common audio editing tasks you’ll need to do in Final Cut.

How to Adjust Volume

There are 2 ways to adjust volume, and we’ll cover them both below. You’ll also be adding 2 keyframes in order to smoothly increase volume across a video clip. Once you learn how to use keyframes, they can be used for just about any audio property you’d like to change.

  1. If you haven’t already, create a Project and add your clips to the Timeline.
  2. Below each clip, you should see an audio waveform. If you don’t, click the Clip Appearance button above your timeline to the right. Then choose a clip appearance with a white bar on the bottom, to add the waveform to your clips in the Timeline.
  3. Above the waveform, you should see a horizontal line. Drag it up to increase the volume of your clips, and down to decrease it.
  4. Open the Audio Inspector by clicking the speaker icon above the inspector, to the top right of your screen.
  5. Create a keyframe in the Volume control by clicking the dark diamond to the right.
  6. Now move the Playhead forward in the Timeline, and create another volume keyframe.
  7. Increase the volume in the Audio Inspector. Final Cut Pro will automatically interpolate between your first and 2nd keyframes, creating a smooth increase in volume between them.

How to use the FCPX Music and Sound Browser

Final Cut Pro comes with an extensive library of royalty-free sound effects and jingles for your videos. These effects include everything from car ignition, door closing, and ambient forest noise.

(Video) Learn How To Use Final Cut Pro In 15 Minutes

  1. Towards the top left of the screen, open the Photos and Audio Sidebar by clicking the camera & music icon.
  2. On the left side, choose Sound Effects.
  3. Scroll through the list or type in what you’re looking for in the search bar above. If you’re looking for music, type in Jingles.
  4. You can preview any sound by clicking the play button to the left of its name.
  5. When you find what you’re looking for, drag it down to the Timeline to add it to your project.

How to Apply Fades to your Sound Clips

Fades are a common way to begin and end a video, or scene–especially if there is a lot of ambient noise. They create a nice smooth transition for the viewer’s ear as they adjust to the audio profile of the new scene.

  1. Select your clip by clicking it in the Timeline.
  2. Go to the top menu bar and select Modify.
  3. Find Adjust Volume on the menu. You can select Apply Fades to apply both fade-in and fade-out to your selected clip.
  4. You can manually adjust fades by dragging the Fade Handles at the beginning or end of any clips in the Timeline.

One extra cool tip for fades: they happen automatically if you use Transitions! So if you’re planning on adding some visual transitions to your video, don’t worry about the audio.

How to do Basic EQ in Final Cut

Too much bass from the wind? Or maybe there’s a shrill noise from nearby machinery. Equalization is how you fix the audio profile of your sound, by adding filters at different frequencies, and there are a lot of great presets already built into Final Cut.

  1. Select your clip in the Timeline, and open the Audio Inspector.
  2. Under Audio Enhancements find Equalization, and click the drop-down menu to the right.
  3. You can choose from a variety of profiles like Music Enhance, Bass Enhance, Hum Reduction. Once you select one, it will be applied to your clip.
  4. If you’d like to customize the EQ yourself, click the mixer icon to the right to open the Graphic Equalizer, where you can adjust the volume of each frequency individually.

Using the Audio Analysis Tool to Automatically Improve Audio

Final Cut Pro comes with a fantastic one-touch Audio Analysis tool that automatically fixes loudness, noise, and hum. It’s simple to use, very powerful, and unique to Final Cut–so it’s definitely worth learning!

(Video) The BEST Way to Edit Audio for Videos

  1. Select your clip in the Timeline and open the Audio Inspector.
  2. Under Audio Enhancements click the magic wand to the right of Audio Analysis.
  3. It may take Final Cut a few seconds to process your audio enhancements. After it’s done click Show to view the different enhancement controls.
  4. You can adjust the sliders under Loudness, Noise Removal, and Hum Removal if you want, although Final Cut Pro has already set these properties automatically.

Adding Audio Effects to your Clips

You’re probably familiar with the Effects Browser which is loaded with tons of cool filters for your videos. But you might not be aware that the Effects Browser is also home to a host of audio effects that can dynamically change the sound profile of your videos. Here’s how to use them.

  1. Open the Effects Browser by clicking the icon on the right side.
  2. Scroll down the left panel until you find the audio section, and select All.
  3. Search through the audio effects until you find one you’d like to use, then drag it to your clip on the Timeline to add it. Some useful effects are Adaptive Limiter, Compressor, Denoiser, Limiter, and Noise Gate.
  4. If you’d like to modify the settings, open the Audio Inspector and scroll down to find the effect’s controls.

Audio effects open up an entire world of possibilities for your audio tracks in Final Cut Pro. One cool trick you might want to try is layering them on top of each other by adding multiple audio effects to the same clip. You can also rearrange their order in the Audio Inspector to achieve different effects.

Using 3rd Party Plugins

Once you’ve learned how to use audio effects in Final Cut Pro, you’ve already got all the skills you need to use 3rd party plugins. Once you download them, plugins will appear inside the effects browser right next to your built-in audio effects, and they work the same way!

Now that you’ve learned all the fundamentals for editing audio in Final Cut Pro, you’re ready to take any project from source footage to fully mastered composition. You’ve learned the basic controls and essential roles that audio plays. You’ve also learned workflows for all the most common audio editing tasks in Final Cut Pro, so you should be set!

Grow your audio editing skills further with our other tutorial on how to fade audio in Final Cut Pro.

(Video) How To Install Final Cut Pro X Templates


How do you clean up audio in Final Cut Pro? ›

(See Audio analysis options in Final Cut Pro.)
Do one of the following:
  1. Choose Modify > Enhance Audio (or press Option-Command-A).
  2. Click the Enhancements pop-up menu below the viewer and choose Enhance Audio.
  3. In the Audio inspector, click the Enhance Audio button next to Audio Analysis in the Audio Enhancements section.

How do you automate audio in Final Cut? ›

In Final Cut Pro, do one of the following:
  1. Select the clip in the timeline, then choose Clip > Show Audio Animation (or press Control-A).
  2. Control-click the clip in the timeline and choose Show Audio Animation.

How can I edit my audio? ›

How to Edit Audio:
  1. Upload your audio files. Upload your audio to VEED; you can drag and drop them into the Timeline.
  2. Edit. Drag the ends of the orange audio track to cut, trim, split or merge audio. ...
  3. Save! Click 'Export' on the top right corner and save your edited audio file on your device!

How do I edit my audio recordings? ›

Part 3. How to Edit a Voice Recording on Android
  1. Open the default voice recording app on your phone and choose a previously recorded audio recording.
  2. Click to play it. ...
  3. From the drop-down menu, select the "Crop" option. ...
  4. After trimming the recording, click "Save" to save the changes.
Dec 30, 2022

How do I clean up sound in audio? ›

How to Remove Background Noise From Audio
  1. Upload Audio. Upload your audio files to VEED - it's all online & works right in your browser.
  2. Remove Background Noise. Click on the audio track, open Settings, then click 'Clean Audio'. Background noise will disappear in seconds, automatically.
  3. Download. That's it, you're done.

What does cleaned audio mean? ›

Audio is often described as being either clean or dirty. Clean audio means it is free from any distracting sounds or frequencies. By contrast, dirty audio does have distracting sounds or harsh frequencies.

Can you edit just audio in Final Cut? ›

You can make audio adjustments and edits to whole clips. At this level, audio adjustments and effects are applied to the entire clip, including any audio channels within the clip. Final Cut Pro preserves any adjustments you make to individual audio channels.

What is automation in audio editing? ›

In the case of music production, automation means having a DAW (Logic Pro X, Pro Tools, Ableton, etc.) automatically perform tasks over time, particularly moving knobs, faders, and switches for you. The most popular use of automation in mixing is to adjust the volume of a track.

Does Final Cut Pro have audio transitions? ›

Create an audio crossfade using the Modify menu

In the Final Cut Pro timeline, select two or more adjacent audio clips or video clips with audio. Choose Modify > Adjust Audio Fades > Crossfade (or press Option-T). Final Cut Pro creates the crossfade at the edit point between the selected clips using media handles.

How do you use keyframes in audio? ›

To add a keyframe put the blue cursor on the timeline where you want to make an audio adjustment and press the apostrophe key (") on the keyboard. the keyframe node and move it up or down to adjust audio levels.

What are keyframes in audio? ›

“ - [Instructor] The concept of keyframing is very simple. You set a mark in time with specific settings and another mark at another time and Media Composer will interpolate the settings.

What are 4 areas of audio editing? ›

Audio editing is a process where we record the audio first and then make it suitable for listening.
  • Recording the audio.
  • Increase volume and decrease volumne of certain portion of volume.
  • Sharing the audio file.
  • Removing the noise, arranging the various audio clips together, adding various effects to sound.

Is it hard to edit audio? ›

Audio editing is tricky; it takes a lot of work and a good ear to create an exceptional piece of audio, whether it's music or sound effects. You cannot simply record something and think it's good to go; recording is simply the starting point. Raw audio needs some (or a lot) tweaking and polishing before it can be used.

Can you edit the audio of a video? ›

Improving audio quality is easy with AVS Audio Editor. This program will allow you to open a video file, edit its audio track and save the result as a video file with the new, modified audio track. Follow these simple guidelines below to edit the audio track of your video.

How do you separate background and voice audio in Final Cut Pro? ›

Detach audio from video

You can easily detach the audio from a video clip so that you can edit the audio clip separately in the timeline. In Final Cut Pro, select the clip in the timeline, then choose Clip > Detach Audio.


1. Final Cut Pro Keyboard Shortcuts Cheat Sheet
(Motion Array Tutorials)
2. How To Use Sound Effects In Final Cut Pro X To Make Your Videos Awesome!
(Motion Array Tutorials)
3. Learn Color Correction in Final Cut Pro X
(Motion Array Tutorials)
4. Final Cut Pro Tips You Wish You Knew Ages Ago
(Motion Array Tutorials)
5. How To Save In Final Cut Pro X
(Motion Array Tutorials)
6. How To Split Clips In Final Cut Pro X
(Motion Array Tutorials)
Top Articles
Latest Posts
Article information

Author: Dr. Pierre Goyette

Last Updated: 01/16/2023

Views: 6526

Rating: 5 / 5 (70 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Dr. Pierre Goyette

Birthday: 1998-01-29

Address: Apt. 611 3357 Yong Plain, West Audra, IL 70053

Phone: +5819954278378

Job: Construction Director

Hobby: Embroidery, Creative writing, Shopping, Driving, Stand-up comedy, Coffee roasting, Scrapbooking

Introduction: My name is Dr. Pierre Goyette, I am a enchanting, powerful, jolly, rich, graceful, colorful, zany person who loves writing and wants to share my knowledge and understanding with you.